Modbus Rtu Gateway IOT Router Long Distance Realy Output Data Acquisition RTU
Product Introduction of IOT Router ZHL4921W
ZHL4921W provides RS232 interface and RS485 interface, users can choose one of them according to the situation, but not at the same time.
ZHL4921W provides a RJ45 network port. The device acts as a server, and it automatically monitors the fixed IP address 192.168.225.1 of the machine and the fixed port 50000. The upper computer is used as a client connection device for debugging configuration.
If the device connected to the network port needs routed Internet access, you only need to set the device connected to the network port to automatically obtain IP mode. After a while, you can obtain the IP address through the network port, and you can route to the Internet at this time. For example, webcams, computers and Internet.
- Parameter of IOT Router ZHL4921W
| Datasheet |
| Serial Port | RS485*1/RS232*1(choose one) |
| Standard | 3.81 Connection port |
| Baud Rate | 2400~115200 bps |
| Data Bit | 8, 9 |
| Stop Bit | 0, 1.5, 2 |
| Parity Bit | NONE EVEN ODD |
| Network Port | LAN*1 |
| Network Port Standard | RJ45 |
| Rate | 0/100Mbps |
| Protection | 2KV(Electromagnetic Isolation) |
| GNSS (Optional) |
| Coordinate System | WSG84 |
| PositionaI Accuracy | 10 Meters |
Factory reset:
There are 2 ways to restore the factory
Method 1: By operating the RESET button, the device can be restored to the field settings.
Step 1: Power on the device, when the work light of the device works normally.
Step 2: Press and hold the RESET button until the device emits (di-di-di) three beeps, release the reset button, the light is off, and the device is successfully restored to factory settings.
Method 2: The equipment can be restored to the field setting by sending MODBUS commands.
Steps:
Write: 55 10 10 24 00 01 02 00 02 09 0C FE 77
Write response: 55 10 10 24 00 01 48 D6
Features of IOT Router ZHL4921W
Support NTP function, realize automatic network time calibration
1 channel 100M industrial Ethernet interface
1 RS485/RS232 serial interface
Interface: AI*1/ DI*2/ DO*1
Support MODBUS RTU and MODBUS TCP protocol adaptation
Support setting the direction of active data reporting
Support TCP_Client, MQTT, HTTP_Client
Interface: AI*1/ DI*2/ DO*1
Support two working modes: master mode, slave mode, master mode supports cascading multiple Modbus devices
Internal self-inspection mechanism to ensure stable operation of equipment
Support cloud forwarding, cloud networking
Support network port, WIFI, remote, serial port configuration
Support domain name address resolution
Support setting APN
Support SIM card number query
Support custom heartbeat package
Support multiple registration packages (ID, CCID, custom) to ensure the legality and uniqueness of the device identity
Support WIFI hotspot/GPS positioning
Support 10*10KB network/serial data buffer
Support timing flip relay status
WIFI Hotspot Function of IOT Router
Function description: ZHL4921W version supports WIFI hotspot function. Please choose whether to enable this function according to the device model.
Note: The WIFI hotspot function is normally enabled, and the device needs to be able to access the Internet normally. The hotspot function can be used normally. Devices connected to WIFI need to be set to automatically obtain IP.
Note the case of WIFI name/password
WIFI enable register address: 41041 (0x0410)
Default value: 0x0001
Product Tags:
|
|
Gateway Modem Router For Iot Devices Images
|
